chore(deps): update jdx/mise-action to v5.2.8

SW
2d ago
+24-31
PackageChangeTypeFile
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/action.yml
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/benchmarks.yml
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/ci.yml
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/patchula.yml
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/release-bot.yml
jdx/mise-actionv5.2.4 → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patch.github/workflows/release.yml
jdx/mise-actionv5.2.4@6be3c7ed4c21d4f76b208d351d95aac273ebb76d → v5.2.8@d5574b52816a478f9d4e6529a3f6ff17a8a36785patchaction.yml

jdx/mise-action

Source · Compare changes

Release notes: v5.2.4 → v5.2.8 (4 releases)

5.2.8

On Windows, the action can now install mise when MISE_DATA_DIR is on a different drive from the temporary directory. Before this fix, the install failed with EXDEV: cross-device link not permitted.

Fixed
  • Installing mise on Windows no longer fails when MISE_DATA_DIR is on another drive. On hosted windows-2025 runners, the workspace and RUNNER_TEMP are on D:, but the action downloaded mise to os.tmpdir() on C:. If MISE_DATA_DIR pointed into the workspace, moving mise.exe into place failed:

    ##[error]EXDEV: cross-device link not permitted, rename 'C:\Users\RUNNER~1\AppData\Local\Temp\mise-action-…\extract\mise\bin\mise.exe' -> 'D:\a\…\tool-cache\mise\bin\mise.exe'
    

    The action now downloads to RUNNER_TEMP when that variable is set and the directory exists. Otherwise it falls back to the system temp directory. If moving mise.exe, mise-shim.exe or a raw mise binary still crosses drives, the action copies the file and then deletes the original. This also covers self-hosted runners where RUNNER_TEMP is on a different drive from the data directory. Setups that use the default data directory were not affected. If you set TEMP and TMP to ${{ runner.temp }} to work around this, you can remove those settings. (#732 by @‍jdx and @‍HengYangDS, fixes #730)

New Contributors
  • @‍HengYangDS made their first contribution in cff84f4

Full Changelog: https://github.com/jdx/mise-action/compare/v5.2.7...v5.2.8

5.2.7

When the action can't download mise, the log now shows the HTTP status and host for each failed attempt. Retries wait longer between attempts, so a short GitHub outage is less likely to fail the job.

Fixed
  • Download failures now show what went wrong, and brief outages are retried for longer. Before this release, a failed mise download logged only The process '/usr/bin/curl' failed with exit code 22 and retried five times with a fixed 2-second wait. From that message you couldn't tell a rate limit from a missing asset or a server error. Each failed attempt now logs the HTTP status and the host that answered:

    Download attempt 1/6 failed: Could not download github.com/…/mise-v2026.10.21-linux-x64.tar.zst (HTTP 503 from github.com). Retrying in 3.4 seconds.
    

    The wait between attempts doubles from about 2s up to a 30s cap, with random jitter, so the five retries cover roughly a minute. Only transient failures are retried: connection errors and timeouts, and HTTP 408, 429 and 5xx responses. A 404, any other 4xx, or a local file-write error fails at once. The log shows only the host and file name of each URL, never signed query strings or curl/wget stderr. Partial files are deleted before the next attempt. wget now runs with --tries=1, so its own 20-retry default no longer stacks on top of the action's retries. This applies to every download the action makes: the release archive, checksums and the packslip bundle. Checksum and signature verification are unchanged, and there are no new inputs. (#722 by @‍jdx, fixes #721)

Changed
  • packslip, which the action uses to verify downloaded mise releases, is updated from 1.11.0 to 1.11.2. This version includes upstream hardening of its verifier checks. (#726)

Full Changelog: https://github.com/jdx/mise-action/compare/v5.2.6...v5.2.7

5.2.6

The action now exits as soon as its work is done. Before this release, a cache restore that failed during the download could leave the step running for up to ten minutes after setup had finished.

Fixed
  • A failed cache restore no longer leaves the step hanging. If the mise cache download failed partway through, for example with getaddrinfo EAI_AGAIN, the action logged a warning, installed the tools and saved the cache, then stopped producing output. The step stayed in progress until the job was cancelled or a timer inside @actions/cache fired after 10 minutes. That timer is left running when a download fails (actions/toolkit#2470), and it kept the Node process alive. The action now exits explicitly after both the main step and the post step finish. It waits up to 5 seconds for log output to flush, then exits. The exit code set by any earlier failure is kept. Errors that aren't Error objects now mark the step as failed with their message. Before, they caused an unhandled rejection. (#718 by @‍jdx and @‍kjanat, fixes #717)

Full Changelog: https://github.com/jdx/mise-action/compare/v5.2.5...v5.2.6

5.2.5

This release updates the packslip library that the action uses to verify downloaded mise releases, and updates the README examples to use the current major versions.

Changed
  • packslip updated from 1.8.0 to 1.11.0. The action uses packslip to check a downloaded mise binary against the signed packslip.sigstore.json that ships with mise releases from 2026.9.3 onward. The new version runs extra checks on the signed statement: the identity it declares must match the certificate that signed it, and the certificate must belong to the github.com/jdx/mise repository. GitHub and GitLab repository names now match regardless of letter case. The action still asks for the same identity, issuer and tag as before, and there are no new inputs. (#715)
  • The README examples now use jdx/mise-action@v5 and actions/checkout@v7. (#710 by @‍deining)

Full Changelog: https://github.com/jdx/mise-action/compare/v5.2.4...v5.2.5

  • Tick to re-check this PR on the next run.
  • Add to the batch PR. This one closes and the update moves there.